Floor Plan Examples Made by Real Visitors

factory hall

An accessible alternative with wider primary routes, clear turning space, and uncluttered entries

Parking Realistic bay size 🚗 Car 2.5 m × 5.5 m 🏍️ Bike / scooter 0.9 m × 2.0 m 🚌 Bus about 3.5–3.75 m × 10–12 m 🚚 Truck about 3.5–4.0 m × 8–12 m ⚡ EV car 2.5 m × 5.5 m + charging equipment ♿ Accessible car about 3.9 m × 5.4 m, including transfer/access space

Prepare a parking lot layout plan based on the following specifications: - Area: 70 × 50 m = 3,500 m² - Parking space dimensions: 3 × 5.20 m = 15.60 m² per space - One-way traffic lanes: 5.20 m wide - Paving blocks: 10 × 20 cm - Main paving surface: Gray - Parking space markings: Red paving blocks - Entrance and exit: Located in the central section of the bottom 70-meter side. Arrange the parking spaces at 90° angles, ensuring adequate maneuvering space for vehicles and a logical one-way traffic flow throughout the parking lot.

Design a rectangular open-air parking lot measuring exactly 20 meters wide by 40 meters long. - Standard car parking spaces: 2.50 m wide × 5.00 m long. - Parking angle: 90 degrees. - Driving aisles: 6.00 m wide for two-way traffic. - Entrance and exit: both located on the same 20-meter-wide side of the property, clearly separated and labeled. - Maximize the total number of parking spaces while maintaining practical vehicle circulation and maneuvering areas. - Include clearly marked parking bays, driving aisles, traffic flow arrows, entrance and exit labels, and overall site dimensions. - Use a clean, accurate 2D top-down architectural floor plan with all measurements in meters. - No buildings or unnecessary landscaping. Keep the entire layout within the 20 m × 40 m property boundaries.

Design an open-air parking lot on a rectangular 20 m × 40 m plot of land. Place both the entrance and exit on the same short side (the 20-meter-wide side). Maximize the number of standard car parking spaces while maintaining practical driving aisles and enough room for vehicles to maneuver safely. Use 90-degree parking spaces if they provide the best capacity. Include clearly marked parking bays, a one-way or two-way circulation layout as appropriate, and clearly identify the entrance and exit. Keep the design simple, efficient, and realistic. Show the entire parking layout in a clean 2D top-down floor plan with dimensions in meters. Do not include buildings, offices, or unnecessary landscaping.Optimize the layout for the maximum number of cars, with efficient aisle widths and no wasted space

Design an open-air parking lot on a rectangular 20 m × 40 m plot of land. Place both the entrance and exit on the same short side (the 20-meter-wide side). Maximize the number of standard car parking spaces while maintaining practical driving aisles and enough room for vehicles to maneuver safely. Use 90-degree parking spaces if they provide the best capacity. Include clearly marked parking bays, a one-way or two-way circulation layout as appropriate, and clearly identify the entrance and exit. Keep the design simple, efficient, and realistic. Show the entire parking layout in a clean 2D top-down floor plan with dimensions in meters. Do not include buildings, offices, or unnecessary landscaping.

a parking lot with 30 spaces editable to write the name of the employees

Parking lot 40ftx50ft. Within a building. Entrance on the east (right) side of layout is for entry and exit. This entrance can be anywhere or any size along that east side. North side, in the middle, is the entry door to the building. Vehicle size allowance is 18ft long x 6ft wide x 7ft high. Show how many vehicles can be safely parked in this space.

Parking lot 40ftx50ft. Within a building. Entrance on the east (right) side of layout is for entry and exit. This entrance can be anywhere or any size along that east side. North side, in the middle, is the entry door to the building.

Parking lot 40ftx50ft. Entrance is on east (right) side of layout is for entry and exit. can be anywhere or any size along that east side.

Parking lot 40ftx50ft

oneway parking lot thats 120 wide by 106 length with circle drive through

oneway parking lot thats 120 wide by 106 length

A parking garage for 12 cars, measuring 24 running meters in depth and 29 running meters in street width, with an entrance ramp to be constructed that is 3.5 running meters wide

een parkeergarage voor 12 auto's met afmetingen van 24 lopende meter bouwdiepte op 29 lopende meter straatbreedte met een inrijhelling te voorzien van 3,5 lopende meter breedte

a parking sport with a few free slots. Dimension - 8,72m x11,8mx6,12m

Review of pilotis parking layout for school expansion. Site dimensions: 51m × 20m; target parking capacity: 53 vehicles; one vehicle entrance; no expansion of external parking space; playground and external spaces to be maintained. Obstacle conditions: includes columns, stairwells, and elevator cores. Generate a maximum autonomous parking layout considering standard parking spaces, actual vehicle lanes, and turning space; if not feasible, present the maximum capacity and the number of spaces in need.

학교 증축 필로티 주차 배치 검토. 공간 치수 51m × 20m, 목표 주차 53대, 차량 진입구 1곳, 외부 주차 공간 확장 불가, 운동장 및 외부공간 유지. 장애물 조건: 기둥 및 계단실 포함. 일반형 주차구획과 실제 차량 통로 및 회전 공간을 고려한 최대 자주식 주차 배치를 생성하고, 불가능하면 최대 수용 대수와 부족 면수를 제시할 것.

un estacionamiento, que sea vertical, la entrada/salida sea por la parte superior izquierda, cerca de la entrada, este la cabina de control del estacionamiento, del lado izquierdo de la pared, 5 plazas de estacionamiento, del lado inferior 5 plazas de estacionamiento, conjunto con un lugar 4x4 techado con puerta, del lado derecho 5 plazas, y en el sector del medio 5 plazas de un lado y 5 plazas del otro pero q esten enfrentados

A high-capacity option that preserves safe circulation between pedestrian route and accessible and loading areas52meterx20 meter

A high-capacity option that preserves safe circulation between pedestrian route and accessible and loading areas

طول شرقی ۴۲ متر طول غربی ۳۹ متر عرض شمالی ۱۱/۶۰ هرض شمالی ۱۲/۶۰ ورودی رمپ و راه پله و اسانسور از عرض ۱۲/۶۰ درصد شیب ۱۵ درصد ابعاد پارکینگ ۵ متر مربع مساحت رمپ و راه وله و اسانسور کن شود نقشه ترسبم شود و تعداد پارکینک به عدد بده

Create a scaled 2D floor plan of ONE underground parking level (Basement -1) of a commercial building in Tehran. Black-and-white CAD-style top view, metric, with dimensions, circulation arrows, numbered stalls and the total stall count. FOOTPRINT (inside the walls): a long narrow four-sided shape. - South side = the only street front, on Ferdows Boulevard: 12.70 m wide, slightly slanted. - North side: 11.70 m wide (blind wall). - East side: 30.40 m long (blind wall). West side: 34.10 m long (blind wall). - Walls 0.20 m thick. FIXED ELEMENTS: 1. Entrance ramp from the street: one-way, 3.50 m wide, along the WEST wall, starting at the south street edge and going north, 24.50 m long, sloping down. No parking on it. 2. Ramp down to Basement -2: one-way, 3.50 m wide, 22.00 m long, along the EAST wall, starting near the north end and going south, sloping down. No parking on it. 3. Turning area at the north end so cars coming off ramp 1 can turn and enter ramp 2. Minimum turning radius 6.50 m at the car path centerline. 4. Stair + elevator core against the EAST wall at the south (street) end: 2.90 m wide x 7.40 m long, plus a 1.50 m fire vestibule on its north side with a door to the parking. 5. Columns 0.60 x 0.60 m along both long walls only, every 5.60 m. No columns in the middle. RULES (do not break them): - Stalls 2.50 x 5.00 m at 90 degrees. - Every stall must open directly onto a drive aisle at least 6.00 m wide. No stall behind another stall. - No stalls on ramps, on the turning area, or in front of the core door. - Stalls go between columns, not on them. - Include 1 accessible stall 3.50 x 5.00 m. - If a rule cannot be met, write which rule on the plan instead of breaking it. GOAL: maximum number of stalls that follow all rules. Write the total on the plan.